The advantages and applications of stainless steel bearings
PRODUCT
Teach you how to remove the bearing on the sleeve
by：Waxing
2020-09-20
Removing withdrawal on the set of bearing, must take the axial locking device: the lock nut and end cover removed.
Remove the small and medium-sized bearings, can use the lock nut and hook spanner or impact wrench to loosen the bearing.
Remove the large bearing is the best way to use the hydraulic nut.
If collar threaded portion protrudes from the shaft end or shoulder, should be inserted in the sleeve hole support ring, support ring wall should be thick, in order to avoid when using hydraulic, tighten nut thread when the deformation damage.
Suggestions on the hydraulic nut end with a stop, for example through the shaft end.
If a withdrawal of all of a sudden shaft with separation, the obstacle can be used to avoid hydraulic nut from the shaft sleeve and back completely withdrawal.
For large bearing sleeve is generally take back with tubing groove, in order to use oil injection method, greatly shorten the time needed for installation and removal of large bearing.
Custom message
Related Products
