KH series stamped outer ring type linear bearings have an inner diameter of 14 mm and 12 mm, an outer diameter of 21 mm and 19 mm respectively, and their length (height) is 28 mm. This series of bearings is composed of a stamped and hardened outer ring with a The glass fiber reinforced phenolic resin guide and cage of the ball group constitutes a complete assembly system unit. The bearing has good wear resistance and strong pressure resistance, and can be directly pressed into the seat hole. The operating principle is the same as that of the sliding bearing. There are Slotted to allow the ball to return to the load zone. This linear bearing series moves linearly as a whole and cannot be used as a support for rotating moving parts. Its stroke is not limited, it requires less space, requires no maintenance, and has low design costs. Therefore, it is widely used in general mechanical equipment. It is mainly used in economic moulds, garden machinery, forklifts, hydraulic crawler drills, loaders, storage equipment, electronic molds, household noodle mixers, office equipment, equipment, drilling and milling machines, electric motors for electric vehicles, ice cream display Cabinets and other machinery industries.

The dimensions of KH series stamped outer ring type linear bearings are:

Stamped outer ring type with an inner diameter of 6mm, an outer diameter of 12mm, and a length of 22mm;

Stamped outer ring type with an inner diameter of 8mm, an outer diameter of 15mm, and a length of 24mm;

Stamped outer ring type with an inner diameter of 10mm, an outer diameter of 17mm, and a length of 26mm;

Stamped outer ring type with an inner diameter of 12mm, an outer diameter of 19mm, and a length of 28mm;

Stamped outer ring type with an inner diameter of 14mm, an outer diameter of 21mm, and a length of 28mm;

Stamped outer ring type with an inner diameter of 16mm, an outer diameter of 24mm, and a length of 30mm;

Stamped outer ring type with an inner diameter of 20mm, an outer diameter of 28mm, and a length of 30mm;

Stamped outer ring type with an inner diameter of 25mm, an outer diameter of 35mm, and a length of 40mm;

Stamped outer ring type with an inner diameter of 30mm, an outer diameter of 40mm, and a length of 50mm;

Stamped outer ring type with an inner diameter of 40mm, an outer diameter of 52mm, and a length of 60mm;

The stamped outer ring type with an inner diameter of 50mm has an outer diameter of 62mm and a length of 70mm.