Revelation! A simple method to take out the bad bearing, it is worth collecting

Bearing, just as its name, axis: central shaft rod; Bear: support hold up, is this meaning. In general, the role of the bearing rotation of the supporting parts, reduce the friction in the process of mechanical motion, so, for mechanical parts is an important part of, if the bearing is broken, it is hard to take, then what should you do? 崋 bearing in the network according to the understanding of the bearing use maintenance, today to share a secret weapon, it can easily and simply remove the bearing, let everybody not to bother to take out the bearing. What is the secret weapon? Everyone to see, it is a steel tube. Is that we introduce today's leading role, is give me a piece of steel tube, the ease with which can remove the bearing to turn around, you believe that? Below to see how it is to let bearing easily turn out! First of all, we have to cut out a root diameter is 4 cm, to 10 cm long pole, surface polishing, it in 5 centimeters, grinding out a circle two millimeters wide groove. Steel pipe with the marker from cross section in two draw a tag line, use cutting machine to cut steel pipe. Then, put a 10 cm of the screw into the steel tube, in put a hand on the side of the steel tube pole. Next, cut the three 10 centimeters long steel bar, one of the drill a set screw rod in the middle of the hole, and then, the three vertical steel welded together, forming a frame of steel frame, put the welding bulge with polished smooth level off, also in the upper part of the steel frame welding a hand lever, will handle good steel tube and steel frame together. Steel pipe and steel frame after assembled, the installed in bearing directly above it, using the lever principle, turn the steel frame on hand lever, screw will turn into bearing, and then in hand lever on the side of the rotating pipe, bearing was taken out easily, isn't it great? This method can save a lot of effort.