Regular maintenance KOYO bearing improve precision of the method

With little lubricant in friction between two fingers, and if the presence of pollutants, can be felt; Or in the back of a thin layer of lubricant, then seal of inspection. If has presented the adverse symptoms, be sure to replace, and bad seal will cause the damage of KOYO bearing, the bearing cloud caused by abnormal equipment downtime. So when we inspection on KOYO bearings before, should first clean the surface of bearing, and then remove the perimeter of the bearing parts. Everyone should pay attention to, oil seal is very fragile parts, so in check and need to be careful, when disassembling do not excessive force, so as not to cause damage to parts. Then carefully check bearing oil seal and its surrounding parts, secondly, we also check the bearing lubricant. 1, bearing the: care for as long as possible in order to retain the original performance of the bearing in good status, care and maintenance, in order to prevent accidents from already, to ensure the operation of sex, consumer and economy progress. Enjoy the best conditions of mechanical operation of the corresponding operation specification, stop on a regular basis. Content includes monitor running status, supplement or a change in smooth agent, sealed, check regularly. Points for maintenance operation, have bearing rotating the sound, vibration, temperature, state of smooth agent and so on. 2, bearing maintenance: bearing cleaning: removing bearing under repair, the appearance of the first recorded bearing, confirm the residual stock of smooth agent, sampling inspection with the smooth agent, after washing the bearing. Common use gasoline, kerosene as a cleaning agent. Tear open come down to KOYO bearing cleaning, rough washing and fine washing, respectively in the container, put a metal mesh bottom first, make the bearing is not direct contact with dirt from the container. Coarse when cleaning, if to spin bearing with dirt, can damage the bearing rolling surface, should be pay attention to. In coarse clean oil, use brush clean up to smooth grease, adhesive, after clean, roughly into fine cleaning). Fine cleaning, bearing side rotation in the wash oil, serious cleaning. In addition, cleaning oil often should insist on cleaning. 3, bearing maintenance and discriminant: removed in order to distinguish the bearing can be able to use, check in the bearing after washing clean. Check the raceway surface, rolling surface, cooperate with the state, adhere to the increase of wear condition, KOYO bearing clearance and has nothing to do with dimension precision landing damage, abnormal. Non separation small ball bearing, the extent of support to inner ring with one hand, rotate the outer ring can confirm fluently.