Bearing Manufacturer In China Leader Since 1995, Roller Bearing Ball Bearing / WXING Bearing 

NEWS

Home  > INFO CENTER  > NEWS  > 

Plummer Blocks

Plummer Blocks

2020-02-16

To ensure effective sealing, plummer blocks are available with a variety of special sealing options and end covers. Benefits include a facility for easy mounting and dismounting of pre-assembled shafts.

Plummer block housings can be used with high-capacity spherical roller bearings or self-aligning ball bearings. They are manufactured from high-strength cast iron as standard but are also available in cast steel or spheroidal graphite cast iron. The housings have a re-lubrication facility and can be used with either oil or grease lubrication.

Features

  1. Split plummer block design allows for easy mounting and dismounting of pre-assembled shafts.

  2. Sealing options - WXING offers a range of sealing options including oil seals, labyrinth seals, or heavy-duty taconite seals.

  3. Case end covers are available.

  4. Multi-relubrication points are provided to ensure relubrication of the bearing depending on orientation.

  5. Housing are supplied with spacer rings in order to provide axial location. Those can be omitted for "free end" axial front.

Standard Type Plummer Blocks
SN5 and SN6 types are the most common type, which are provided for in JIS B 1551, ISO 113/II, and DIN736, 737. SN30 and SN31 types are medium size and their shaft diameters are bigger than that of SN5 and SN6 types. For these types, a bearing is mounted with the use of an adapter.


Large Plummer Blocks

These are large size and for heavy-duty application. They have dual structure oil seals. For these types, a bearing is mounted with the use of an adapter.

Dustproof Plummer Blocks
This is a dustproof type, and this was developed by NSK. It has a combination of oil seals, labyrinth seals, and oil groove seals; therefore, it is suitable for environments with dust and other foreign matters.
For this type, a bearing is mounted with the use of an adapter.


Stepped-Shaft Type Plummer Blocks
SN2C and SN3C are the types that the bore diameter of one side is smaller than that of SNa2 and SN3 respectively, and they are provided for in JIS B 1551. For these types, a bearing is mounted with the use of a nut and washer.


Chat Online 编辑模式下无法使用
Leave Your Message inputting...