Jiaxing bearing factory: preparations before assembly

【 Jiaxing bearing group co. , LTD. ) Jiaxing bearing group sales co. , LTD was established in jiaxing bearing spot sales window, specializing in HRB bearings, have stock 50 million yuan, in terms of production design and related mechanical application has a wealth of technical experience, today we are together and our experts to study the preparation work before assembly. The preparing work before assembly: ( 1) Depending on the type of bearings and cooperate with the nature, structure, size, select the appropriate assembly methods and tools. （ 2) Check on the surface of the bearing assembly assembly processing quality, including the size tolerance, form tolerance and surface roughness, etc. If there is any rust, surface defects such as bruised carefully removed. （ 3) Don't allow the bearings when the gauge to measure the accuracy of journal or bearing hole. Nor chamfering, grinding groove on the bearing and so on, this not only makes the bearing deformation, but also easy to chip into the bearing to bearing damage. ( 4) New bearing must be carefully cleaned before assembly, after cleaning the bearing cannot be directly on the platform, with a clean cloth pad under the bearing, also can't bare hands to pick up, in case of hand sweat rust bearing. If you are looking for the above bearing factory introduction of jiaxing jiaxing bearing related technical knowledge interested or have any questions, please click on contact us page on the right side of the online customer service, or call: 4000866629, jiaxing bearing sales center you full thoughtful procurement consultant. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, Sales center) Reprint please indicate the source