Jiaxing bearing group introduce you to the form of common oil seal

There is rotational, have HRB bearing ( ） Jiaxing bearing group sales co. , LTD. Is established in spot sales center, specializing in HRB bearings, bearing applications of rich experience, today we are going to introduce for everybody in the form of common oil seal. 1, a main oil seal lip with spring, rely on the sealing edge unilaterally to prevent leakage when applicable. Working conditions: a. Rotation: 0 ~ 25 m/s b. Job stress: 0 ~ 0. 05Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: oil, grease, water, etc. 2, oil seal lips with spring, with the main lip to prevent leakage, deputy lip to prevent dust and moisture to enter when applicable. Working conditions: a. Rotation: 0 ~ 25 m/s b. Job stress: 0 ~ 0. 05Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: oil, grease, water, etc. 3, with no spring of oil seal, only use the rubber lip radial force of the single direction leakproof, with other type of oil seal and when necessary. Working conditions: a. Rotation: 0 ~ 12 m/s b. Job stress: 0 ~ 0. 03Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: grease or viscous fluid, etc. 4, lips without spring oil seal, only use the rubber lip radial force, used for sealing is used when two direction. Working conditions: a. Rotating speed: 0 ~ 10 m/s b. Job stress: 0 ~ 0. 03Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: water, oil, grease, dirt, etc. 5, double main compound oil seal lip with spring, use process should be this two kinds of liquid separation, assembly time to spread between the two lips. Working conditions: a. Rotation: 0 ~ 12 m/s b. Job stress: 0 ~ 0. 05Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: oil, grease, or other liquid, etc. 6, applied to the relative rotation of the seal, main yan to prevent dust and water enter the bearing parts of the impurities such as grease or sealing system. Working conditions: a. Rotating speed: 0 ~ 10 m/s b. Job stress: 0 ~ 0. 05Mpa c. Working temperature: 0 ~ 120 ℃ d. Sealing medium: oil, grease and other 7, set with rubber in metal ring inside the main body, and the axis of rotation to produce relative motion. Working conditions: a. Rotation: 0 ~ 12 m/s b. Job stress: 0 ~ 0. 05Mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: oil, lubricating oil, grease, water, etc. 8, the seal is applied to the axis of rotation. Working conditions: a. Rotating speed: 0 ~ 300 times/min b. Job stress: 0 ~ 5 mpa c. Working temperature: - 35 ~ 120℃d。 Sealing medium: oil, water, etc. 24-hour customer service hotline: if you are interested in the above jiaxing bearing or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: the company jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source