22226E spherical roller bearing
E-cage bearing, the change-shaped cage is a new structure of pressed cages for E-type spherical rolling bearings
Becomes more durable and strong, it is your best choice

Weight: 11.3kg
Diameter:
d: 130mm
D: 230mm
B: 64mm
rs (min): 3mm
H(≈): 205.1mm
J1(≈): 151.7mm
n(s): 12.2mm
d(s): 6.3mm
Load rating (kN):
C: 630kN
e: 0.26kN
Fa/Fr ≤e: 2.62Y
Fa/Fr>e: 3.9Y
C0: 880kN
Y (0): 2.56
Speed:
limited speed: 3000min (-1)
Rated speed:2600min (-1)
Equipped dimensions:
D1: 144 min/mm
D2 (max): 216 min/mm
rg (max): 2.5 min/mm

Firstly, E-cage bearing's structure is compact, it can accommodate more rollers
Height of the rollers is higher than normal CA CC MB type
Contact area of the bearing is larger and capacity is stronger
Second, E-cage of bearing under nitriding processing, it has very good elasticity, compact and rollers friction coefficient is small
There is no inner ring flange, it largely reduces heat generated when using
It makes life longer and reduces noises
It is better than any other bearings
Third, E-cage bearings equipped with guide ring inside, it has very good guide effect
Because guide ring is on the outside of the cage, it belongs to outside guide bearing
It also can use to vibrating screen and crusher
Fourth, E-cage bearing is with separate cage, it can also be used in a complex environment
It is not easy to lock, and also has a very good shockproof effect
Fifth, E-cage is steel plate stamping, compare with brass cage, it is no brass pollution
Sixth, E-cage bearing 's rollers are under special processing, end face's contact area is small
Low noise and less friction makes long service life
Service life is longer than any other bearing, the speed is higher than any other bearing and the noise is lower than any other bearing