When the bearing is removed for inspection, the appearance shall be recorded by means of photography.Also, confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearing.

The cleaning of the bearings is divided into rough washing and fine washing, and the bottom of the container can be placed on the metal network.

For rough washing, remove grease or stickiness in oil with a brush, etc.If the bearing is rotated in oil at this time, note that the rolling surface will be damaged due to foreign matter.

In fine washing, turn the bearing slowly in oil and carefully.

Usually the use of cleaning agents for neutral water diesel or kerosene, according to the need sometimes also use warm lye.No matter what detergent you use, always filter to keep clean.

How to clean bearings properly:

1. When removing the bearing for inspection, make appearance records by means of photography.

2. In addition, confirm the amount of the remaining lubricant and sample the lubricant before cleaning the bearing.

3, the bearing cleaning is divided into rough and fine washing, and can be used at the bottom of the container on the metal network frame.