Analyze the preparation of TIMKEN bearing routine inspection
Analyze the preparation of TIMKEN bearing routine inspection
PRODUCT
Non-standard bearing manufacturer to remind you to use bearing considerations
by：Waxing
2020-11-15
Non-standard bearing manufacturer to remind you to use bearing note source: bearing | last updated: - 2020
07 -
Note 1 14 use non-standard bearings.
Running a year later, 2 # spindle oil and coarse fine filter should be changed.
2.
Normal use of the pump station during oil filling, it is necessary to filter with 3 layers of silk cloth.
3.
Spindle pulley and the grinding wheel loading and unloading should be carried out under the conditions of pumping station operation, namely the spindle under the conditions of static pressure oil float, it won't damage the spindle and dynamic pressure bearing.
4.
Before operating wheel spindle, please check the pressure of pump station and grinding head of static pressure is within the scope of the standard.
5.
Equipment stops, the grinding head motor must first stop, grinding wheel stopped, then close the pump station, otherwise, the grinding head will be damaged.
6.
Replacement pump station on any parts, you must first remove inlet high-pressure hose connector, replacement parts, before connect into the tubing to grinding head, oil will automatically cycle 15 to 20 minutes, this will ensure that the entry of the grinding head spindle oil is the super clean spindle oil after fine filter, in this way, can prolong the service life of dynamic pressure spindle
Custom message
Related Products
