Bearing Manufacturer In China Leader Since 1995, Roller Bearing Ball Bearing / WXING Bearing 


Home  > INFO CENTER  > NEWS  > 

Characteristics, use and installation of deep groove ball bearings

Characteristics, use and installation of deep groove ball bearings


Deep groove ball bearing characteristics:

Deep groove ball bearings are the most commonly used rolling bearings.It is simple in structure and easy to use.Mainly used to bear the radial load, but when increasing the radial clearance of the bearing, with

The performance of a certain Angle contact ball bearing, can withstand the diameter, axial joint load.It can also be used to bear the pure axial load when the rotational speed is high and the thrust ball bearing is not suitable.

Compared with other types of bearings of the same size, the friction coefficient of such bearings is small and the limit speed is high.But it is not suitable to bear heavy load.

After the deep groove ball bearing is mounted on the shaft, the axial displacement of the shaft or housing in both directions can be limited within the axial clearance range of the bearing.

In addition, this kind of bearing also has a certain centering ability, when relative to the shell hole tilt 2 '~ 10', still can work normally, but has a certain impact on the bearing life.

Deep groove ball bearing retainers are mostly steel plate stamping wave retainers, large bearings are mostly car metal retainers.

Deep groove ball bearings are widely used in automobiles, tractors, machine tools, motors, water pumps, agricultural machinery, textile machinery, etc.Deep groove ball shaft with dust cover and seal ring

An appropriate amount of grease has been filled in during assembly. It should not be heated or cleaned before installation, and it should not be lubricated during use. It is suitable for operating temperature between -30 ℃ and +120 ℃.

Chat Online 编辑模式下无法使用
Leave Your Message inputting...