Insulating bearings 6001CE-2LS
PRODUCT
Needle roller bearing order, for example, and the order code
by：Waxing
2020-06-16
Needle roller bearing grease lubrication order, for example, and the order code with needle/thrust ball bearing shaft 20 mm order code: NKX 20 z NXNX.
。
Z series TN = plastic cage, allowable operating temperature: + 120 c (
Continuous work)
。
- - - - - -
End the belt cover.
1)
Basic rated thrust parts must be applied to the axial static load Co's 1% load.
2)
Oil lubrication limit speed.
If use grease lubrication, 60% of the permissible values given in the table.
3)
Inner ring must be separate order, for further details see the inner ring section.
4)
Ring on the WR and SW must be separate order.
The belt cover or without fixed cover NKXNKX.
。
Z series TN = plastic cage, allowable operating temperature: + 120 c (
Continuous work)
。
- - - - - -
。
End the belt cover.
1)
Basic rated thrust parts must be applied to the axial static load Co's 1% load.
2)
Oil lubrication limit speed.
If use grease lubrication, 60% of the permissible values given in the table.
3)
Inner ring must be separate order, for further details see the inner ring section.
The belt cover or without fixed cover NKXRNKXR.
。
Z series of thrust bearing cage is made of plastic.
Permissible operating temperature + 120 ° C (
Continuous work)
。
1)
Basic frontal thrust parts must be applied to the axial static load Co's 1% load.
2)
Oil fat limit speed.
If use grease lubrication, 60% of the permissible values given in the table.
3)
When calculating allowable speed according to the thrust bearing.
4)
Inner ring must be separate order, for further details see the inner ring section.
Custom message
Related Products
