Jiaxing bearing | bearing cutting heat and cutting temperature and cutting amount selection!

There is rotational, have HRB bearing ( ) Jiaxing bearing | bearing cutting heat and cutting temperature and cutting amount selection! 。 Jiaxing bearing group sales co. , LTD. ( The company) Is jiaxing bearing factory set up in the spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong cash supply ability. Cutting heat and cutting temperature, cutting heat is another important physical phenomenon in the process of bearing material cutting. Cutting temperatures caused by cutting heat, thermal deformation is generated. Directly influence the machining accuracy and surface quality imported bearing material. Cutting temperature is the main factor affecting the durability. Therefore, the study of the production of cutting heat and cutting temperature and the change rule, has very important practical significance. The generation of cutting heat and efferent bearing material, in under the action of the cutting tool, cutting layer metal elastic deformation and plastic deformation occurs, this is a source of heat cutting; At the same time. In the chip and the rake face, the consumption of friction between workpiece and cutter surface after work will be converted to heat energy? This is another source of heat cutting. Cutting heat from the chip, cutting tool, workpiece and the surrounding medium conduction. According to the principle of thermodynamic equilibrium, the heat generated by the equal and spreads the heat. Bearing sets of choosing rough machining, cutting feed processing according to the material, the size of the tool rod, workpiece diameter and amount of turning operations have been identified, reference manual or relevant materials and combining the cutting parameter machine specification, selection: coarse car f = 0. 2 mm/r, rough boring f = 0. 15mm/r; Semi-finishing and finish machining, in accordance with the requirements for the surface roughness, according to the workpiece material, tip arc radius and cutting speed, select: half a fine car f = 0. 15 mm/r, f = 0. 1 mm/r, fine boring f = 0. 1mm/r。 24-hour customer service hotline: if you are more interested in jiaxing bearing the author introduced the industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source