: bearing heating installation

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn bearing heating installation. Bearings heating installation: through heating bearing or bearing seat, by using thermal expansion will fit into a loose fit installation method. Installation method is a kind of common and energy saving. This method is suitable for interference quantity larger the installation of the bearing, the bearing before hot charging type or separable bearing ring into the fuel tank 80 - uniform heat 100 ℃, and then loaded on the shaft, as soon as possible out of the oil to prevent inner ring after cooling end face and shoulder joint is not tight, bearing axial fastening again after cooling. Bearing outer ring and light metal bearing seat tight fit, by heating the hot charging method of the bearing, can avoid the mating surface scratch. Heating tank with bearing and should be at a certain distance from the bottom of a mesh, or hanging hooks in the bearings, bearing on the bottom, in case of heavy impurities into the bearing or uneven heating, fuel tank must have a thermometer, strictly control the oil temperature shall not exceed 100 ℃, in order to prevent the tempering effect, reduce the hardness of the ring. If you are looking for the above jiaxing bearing factory introduction of stainless steel deep groove ball bearings are interested or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: sourcing consultant LTD. All rights reserved, Jiaxing bearing factory) Reprint please indicate the source