loading

NEWS

Home  > INFO CENTER  > NEWS  > 

Y- bearing with eccentric locking ring

Y- bearing with eccentric locking ring

2020-05-05

There is a section of eccentric extension, the y-bearing with eccentric locking ring is mainly suitable for the application of inconvenient rotation direction fixation.One side of the bearing inner ring.Fit with lock ring.Turn the locking ring on the extension section of the inner ring in the direction of rotation to lock the sleeve ring and bearing onto the shaft.A flat head screw is used to further tighten the collar to the shaft. 

 

SKF offers two standard series:

 

The inner ring extends on one side, and one is the YET2 series of y-bearings.Strong Superagris seals are provided on both sides.The eccentric locking ring is coated with galvanized coating.Specification outer ring with two lubrication holes. 

 

Make the bearing run more smoothly.These bearings are fitted with rugged specification Superagris seals and YEL2 series y-bearings with inner rings protruding from the sides.This helps reduce the axial tilt of the inner ring.And one of the following two oil retaining rings:

 

The type suffix is 2F oil baffle ring made of ordinary steel sheet.

 

Steel plate oil ring with rubber seal lip (multiple seal) model suffix is 2RF

 

The outer ring shall be in standard form with two lubrication holes.SKF can also provide bearings without refueling holes as required by customers.These bearings are denoted by the suffix W. 

 

These SKF bearings are included

 

Suitable for bearings with diameter range of 15-60mm and matching metric shaft. 

 

Applicable diameter range is 1/2-215/16 inches.Bearing with British shaft.


Chat Online 编辑模式下无法使用
Leave Your Message inputting...
Thanks for your message, we will reply you soon in our working time!