Reasons to KOYO bearing service life and maintenance measures - bearing knowledge

Only 25% of bearing performance depends on the quality of the bearing. Other factors, such as installation, lubrication and maintenance, in fact, the biggest influence on bearing life. Improper assembly 16% of all kinds of bearing early failure is due to improper assembly ( Is usually due to the large hard. . . ). And not the correct use of assembly tools. Some devices require the use of mechanical, hydraulic or heating method for the erection and dismantling of correct and effective. Only 25% of bearing performance depends on the quality of the bearing. Other factors, such as installation, lubrication and maintenance, in fact, the biggest influence on bearing life. Improper assembly 16% of all kinds of bearing early failure is due to improper assembly ( Is usually due to the large hard. . . ). And not the correct use of assembly tools. Some devices require the use of mechanical, hydraulic or heating method for the erection and dismantling of correct and effective. Bearing provides a full range of tools based on a variety of professional engineering services and equipment, make the work easier, faster and more cost calculation efficiency. Using special tools and techniques for professional assembly, is to realize the maximum extension of the machine running time of another solution. Despite the improper lubrication can install all kinds of 'maintenance' sealed bearing, but 36% of bearing early failure is due to the technical application of the grease is incorrect and improper use. Any improper lubrication of the bearing is inevitably in the normal service life before failure in advance. Because of the bearing is usually the most not easy loading and unloading machinery parts, often do not lubrication can be a problem. In cannot be achieved under the condition of artificial maintenance, bearing can make automatic lubrication system to achieve the best effect of lubrication. As long as according to require the use of the bearing grease, tools and techniques for effective lubrication, will help to significantly reduce downtime. Pollution is bearing precision parts, if the bearing and the pollution of grease, will not be able to run efficiently. In addition, because already have grease injection of maintenance-free sealed bearing make up only a small part of all in the bearing is used so there are at least 14% of all the early failure of the bearing is caused by the problem of pollution. KOYO has excellent bearing manufacturing and design ability, can provide sealing solutions for all kinds of bad working environment. Fatigue if overloads, improper use or maintenance to the machine, bearing will be affected, leading to early failure of the 34% of the bearing is caused by fatigue. Due to the large bearing in improper maintenance or stress will glow 'early warning', you can use KOYO bearing condition monitoring equipment for testing and analysis, so the abrupt or unplanned failure can be avoided. KOYO bearing analysis, the main task of the service life is based on a lot of background material, analyze data and failure forms, find out the main factors of bearing failure, so that the improvement measures are put forward, prolonging bearing, avoid premature failure of the bearing of the sudden. ( 1) And keep the bearing and its working environment clean. Even the eyes can't see the little dust, also can bring bad influence to KOYO bearing. So, keep the surrounding clean, dust from invading bearing. ( 2) , carefully use. In use for bearing strong impact, will produce scar and creasing, become the cause of the accident. Severe cases, can crack, fracture, so must pay attention to. ( 3) And use the appropriate operating tools. Avoid to existing tools to replace, must use the appropriate tools. ( 4) And to pay attention to the corrosion of the bearing. Operating KOYO bearing, hand sweat will become the cause of rust. Pay attention to the operation with clean hands, it is better to try to bring gloves.