How to fix the inner and outer rings of bearings?
How to fix the inner and outer rings of bearings?
PRODUCT
Parsing bearings of different types and their USES
by：Waxing
2020-06-17
Sliding bearing without inner ring or outer ring, rolling element.
They are usually made of wear-resisting materials.
Is typically used for low speed, light, lubrication and difficult to maintain the mechanical rotating parts.
Joint bearing the sliding contact surface is spherical, mainly is suitable for the swing movement, tilt motion and rotation motion.
Rolling bearings carry the load according to its direction or in the name of contact Angle is divided into the radial and thrust bearings.
Radial contact bearing is radial bearing of the nominal contact Angle of 0, the radial contact bearing is nominal contact Angle is greater than 0 to 45 radial bearing.
Bearing is an important part of modern mechanical equipment.
Its main function is to support mechanical rotator, reduce the coefficient of friction in the process of the movement, and to ensure that the rotation accuracy.
Bearing type generally have front, basic code and post code.
In general, bearing model using only the basic model.
Basic models generally contains three parts, the type code, code and inner code size.
The basic code is used to indicate the inner diameter of the bearing, diameter, width and types.
Post code is to use letters and Numbers said bearing structure, the special requirements of tolerance and material, etc.
Lead a code used to represent the bearing of the division, with the letters.
Custom message
Related Products
