How to measure FAG imperial bearing temperature

Usually, inch bearing temperature as bearing operation began to rise slowly, 1 - After 2 hours to reach steady state. FAG bearing normal temperature due to the heat capacity of the machine, heat dissipating capacity, rotational speed and load. If the lubrication, installation is not appropriate, the bearing temperature will go up sharply, there will be unusually high temperature, then must stop running and take necessary precautions. Using thermal device can monitor the imperial bearing operating temperature, and implement e. automatic alarm when the temperature exceeds or stop to prevent the shaft accidents. With high temperature often said bearing is in abnormal situation. High temperature also harmful to the bearing lubricant. Sometimes FAG bearing overheating can be classified to the bearing lubricant. If the imperial bearing in more than 125 ℃ temperature for a long time even move to reduce the bearing life. The causes of high temperature bearing include: lubrication inadequate or excessive lubrication, the lubricant. Contains impurities, heavy load, bearing damage, clearance, high friction and oil seal and so on. Therefore the continuous monitoring of imperial bearing temperature is necessary, whether measured FAG bearing itself or other important parts. If it is on the basis of the operating conditions, the temperature change of any fault has occurred. Regular bearing temperature measurement by using a thermometer, bearing type digital thermometer, for example, can accurate FAG bearing temperature measurement and display by ℃ or Fahrenheit units. Importance of imperial bearing, means that when the damage cause of equipment downtime, so this type of FAG bearing should be equipped with best temperature probe. Under normal circumstances, the imperial bearing in just after the grease or lubricant will be a natural temperature rise and the last one or two days.