How completes the lubrication of the combine harvester

How do combine lubrication - 2018 08 - 23, during busy farming as NongJiShou, especially new machinist, especially to combine lubrication, to guarantee the normal work. Therefore, we should pay attention to the following aspects: 1. In strict accordance with the specification requirements of the time period, models, parts of lubrication oil. 2. Filling lubricating oil apparatus used to clean. Before the lubrication lubrication part should wipe nozzle, filler, grease and dust. 3. Often should check the shaft sleeve, bearing friction parts of the operating temperature, if discover oil seal leakage or working temperature is too high, should be timely repair and lubrication. 4. Sprocket, chain lubrication under the parking state, should be to remove the oil sludge on the chain lubrication, wipe brush evenly. 5. After walking clutch release bearing and shaft sleeve must remove lubrication, usually conducted once a year. 6. United harvest machine commissioning finished or after a long time of operation, gear oil, engine oil sump oil should be replaced or reoccupy after filtering, the general inspection once a week, if it is found that the oil or oil level is insufficient, should be added immediately. 7. Wood bearing shell should be in areas such as the wheel is designed in 120 ~ 130 ℃ before use oil boil 2 hour, then smeared with the butter is installed. 8. When loaded with butter must be adequate. When filling don't go in, add after rotating lubrication parts, until full. 9. The lubrication parts, removable bearings, bushings, slider, etc should be combined with maintenance, wash clean, with oil filling lubricating oil after assembly. 10. All the oil bearing at the end of the season homework should be unloaded, immerse 2 hours in the hot oil filling oil.