Their high corrosion resistance of allowing them in wet and chemical corrosion environment, excellent performance, due to the lack in most ceramic free electrons, they are magnetic and good insulators.
Check the working pressure of the pump pressure gauge, air bearing belongs to the sliding bearing, sliding bearing of the fluid for fluid lubrication at work, its lubricating medium of air.
Liquidity test is under the low temperature grease can be pumping test method, bearing kind of lubrication methods are introduced in this paper, hope will be helpful to you.
Caused by inadequate lubrication bearing damage can be divided into to subordinates: levels of injury -
—
Heat change surge working temperature, leading to damage level -
—
Scratch and spalling overload, low speed or sudden up the working temperature of the oil film is too thin cause micro level spalling damage -
—
Overheat cause thermal damage to metal contact between the roller end of tapered roller thermal damage level injury -
—
How to protect the whole bearing reasonable lubrication?
Correct lubrication, regular maintenance, and can avoid bearing damage caused by lubrication problem.
Sauvy industrial carbon similar kind of cold welding technology of polymer materials, online repair process does not produce high temperature, good to protect equipment from damage of ontology, and not be restricted by wear is in the process of repair.
Rolling mill bearing lubrication of roller bearing lubrication and other rolling bearing lubrication basic in principle, but in bad working conditions of roller bearing, its performance could get effective play to a great extent, depends on the situation of the lubrication of the bearing.
Strong physical and chemical stability, and can extend the grease filling, fatliquoring cycle times, in the process, do not make the motor end cover on the shaft, avoid damage to the generator shaft, should be placed gently.
Installation of bearing seat, etc. The rest of the accessories, welding operation in large shaft bearing block for oxyacetylene flame preheating, using neutral flame uniform heating, rising up to ℃ or so.
Magnetic liquid vacuum as a kind of new form of lubricating grease, to explore the improvement of the performance of the bearing lubrication opens up a new space, studying the bearing capacity of the oil film of liquid, especially for base load with grease as the fluid is more practical significance.
Experience summary, more practical fast and more reliable, and the solution: will end bearing designed transition or clearance fit, so that the vibrator shaft when heat bilges cold shrink can be sliding relative to the inner ring.
Angular contact bearings, can bear radial and axial load at the same time, because ball with slide clearance is too small, increase torque, friction, bearing operating temperature is too high, causes the bearing wear and fatigue and failure.
The temperature change under the environment of durable, can remain stable for a long time the torque;
A lot of types, the classification of the shaft, shaft, according to the axis of different shapes can be divided into direct axis, crank shaft, and flexible shaft.
