Bearing on the coated with rust preventive methods

Bearing on coated with rust preventive method of source: bearing | last updated: - 2020 10 - 21 bearing on coated with rust preventive method 1) Foaming method, some small and medium-sized objects select foaming method in the vegetable oil antirust processing, make its surface adhesion on rust layer of vegetable oil. After the oil film thickness can be according to the antirust processing temperature or to determine the viscosity of vegetable oil. 2) Used for outdoor construction equipment or unique product appearance of coating method, is not suitable for outdoor construction equipment or outdoor construction equipment or does not apply to blister, painting or coating of the product, not only to the appropriate attention to cause deposition, and to avoid forget to apply. 3) Spray method of some large and medium-sized rust products can't use impregnation method in oil. In general, spray paint is in the working pressure is about 0. 7 million mpa filtering compressed gas purification area of the air. Spray method can use organic solvent diluent type corrosion inhibitor or chromatography rust inhibitor, but be sure to choose a sound fire security and safeguard workers. Read this article also browse: bearing factory tutor you bearing anti-rust treatment way of categories 1) By antirust processing objects: surface cleaning must be in accordance with the characteristics of the surface and then standard, select the modest way. Generally have organic solvent cleaning method and cleaning method, organic chemical solution mechanical equipment cleaning method. 2) Surface dry clean, usable dry compressed air drying excessive anxiety, or use the 120 - 170 c air dryer and dry, also can use clean cloth to clean sand.