6208 / HR22Q2 bearing combing knowledge

6208 / HR22Q2 bearing knowledge source: bearing | last updated: - 2020 06 - 11 6208 / HR22Q2 bearing knowledge comb bearing outer spherical bearing cleaning and inspection before installation guide bearing, also should be checked into a comprehensive cleaning. The bearing inner cavity with a scraper dirt away, a cloth dipped in gasoline or solvent dirt rub-up, watch the crack and sand holes, in order to prevent in operation of oil leakage. Bearing cover and the bearing joint face, bearing and the bearing oil baffle in combination with surface should be crapping to cooperate, and feeler to check the clearance shall not be greater than zero. 3 mm. Place and the bottom surface of the bearing also want to clean up, should not have bruising, corrosion and burr. Tighten the screw of the bearing plate and screw are asked him to check, and try to twist screws to check whether too tight or bald buckle. Bearing along with the advance of science and technology, the influence of all kinds of high-tech products has entered people's life and work, for the precision machinery industry, its development reached a new level. The emergence of the impact of the bearing, bearing and makes the development of the industry has reached the peak. The influence of the bearing is multifaceted. First of all, the influence of the bearing extremely large. Bearing the emergence of promoting the development of the precision machinery industry. Not only that, but also brought economic benefits for the industry. Extraordinary income. Secondly, the bearing cover areas is also very extensive. The bearing manufacturer for this product research and development technology benefit the industry. Bearing value of absolute is a traditional bearing. Third, in terms of cost performance, bearing products not only suitable for low cost electric furniture small parts, and can also be seen in the aerospace industry. The image of the product are everywhere. On the contrary, the previous traditional bearing is very difficult to do this. Fourth, in terms of accuracy, bearing manufacturers in the bearing has invested a lot of costs and resources, the precision of the bearing can even reach even nano. This achievement is the minimal value is also unprecedented. The emergence of the bearing is also achieved the dream of people subminiature precision.