The method for determining IKO bearing replacement

Whether IKO bearing should be the repair concrete judgment method, namely, IKO bearings have make full use of the near destruction of specific judgment method is as follows: 1) Using IKO bearing working condition monitoring instrument using SPM or I - such as iron spectrometer ID— Type 1 IKO bearing working condition monitoring instrument to determine the working status and decision IKO bearings IKO bearings when should be the repair, this is the most convenient and reliable method. For example, when using the HD - Type 1 instrument, when a pointer by warning area close to the danger zone, and after the measures such as to improve the lubrication pointer has not returned, can be ascertained is the IKO bearing itself, can take at this time has not yet come into the danger zone, IKO bearing repair service. Exactly how far away from the danger area began to repair, can be adjusted by the experience. Use of such instruments, can make full use of potential IKO bearing work, timely will IKO bearing repair service, and can avoid failure, is safe and economic. 2) Using simple tools to monitor in does not have the occasion of the instrument, the operator can hold or wrench tools such as conflict of round the closest IKO bearing machine shell parts, ashamed of tools to monitor the ear tool by the sound of IKO bearing operation, using a stethoscope modification can also, of course. Normal working of IKO bearings should be uniform, smooth not harsh voice, and not normal IKO bearing ring has a wide variety of intermittent operation, impact or harsh voice. First have to get used to the normal IKO bearing operation, then can grasp the judgment is not the normal working of IKO bearings, and then through the accumulation of practical experience, and further can analyze what kind of what kind of IKO bearing abnormal sound corresponds to the abnormal phenomenon. IKO bearing abnormal sound a lot of categories, it is difficult to talk, mainly by experience accumulated.