Taipei TPI bearing of remaining, cleaning and maintenance, smooth and device

About bearing, cleaning and maintenance, smooth and care device. For as long as possible in order to retain the original performance of the bearing in good status, care and maintenance, in order to prevent accidents from already, to ensure the operation of sex, consumer and economy progress. Enjoy the best conditions of mechanical operation of the corresponding operation specification, stop on a regular basis. Content includes monitor running status, supplement or a change in smooth agent, sealed, check regularly. As maintenance issues in the operation, the rotation of the Taipei TPI bearing state of sound, vibration, temperature, smooth agent and so on. A bearing cleaning remove TPI in Taipei, Taiwan, TPI bearing repair, the appearance of the first recorded Taipei TPI bearing, confirm the residual stock of smooth agent, sampling inspection with the smooth agent, after wash TPI bearing in Taipei. Common use gasoline, kerosene as a cleaning agent. Tear open come down to the Taipei TPI bearing cleaning, rough washing and fine washing, respectively in the container, first put on the metal mesh at the bottom of the bearing is not direct contact with dirt from the container. Coarse when cleaning, if to spin bearing with dirt, can damage the bearing rolling surface, should be pay attention to. In coarse clean oil, use brush clean up to smooth grease, adhesive, after clean, roughly into fine cleaning). Fine cleaning, bearing side rotation in the wash oil, serious cleaning. In addition, cleaning oil often should insist on cleaning. Bearing maintenance and discriminant: removed in order to distinguish the bearing can be able to use, check in the bearing after washing clean. Check the raceway surface, rolling surface, cooperate with the state, adhere to the wear condition, the increase of the bearing clearance and has nothing to do with dimension precision landing damage, abnormal. Non separation small ball bearing, the extent of support to inner ring with one hand, rotate the outer ring can confirm fluently. Tapered roller bearing type bearing separation, able to roll body, the outer ring raceway surface check respectively. Large bearing can't rotate with the hand, pay attention to check the rolling element and raceway surface, adhere to the rack, guard surface appearance, such as the importance of bearing high needs careful check. Second, bearing the smooth bearing: the purpose of smooth smooth purpose of rolling bearings is to reduce the bearing internal friction and the friction losses, avoid burning stick, its smooth effect is as follows. （ 1) Reduce friction and friction losses. In the form of bearing ring, rolling body and insist on each other contact local, avoid contact with metal, reduce friction and wear. （ 2) Longer fatigue life. Rolling bearing fatigue life, in the rotation, smooth rolling contact surface is good, is extended. On the contrary, low oil viscosity, smooth and oil film thickness is not good, is reduced. ( 3) Discharge the friction heat and cooling. Circulation method to oil and so on can oil discharge by the heat of friction attack, or coming from external heat, cooling. Avoid overheating bearing, smooth oil itself. ( 4) Other: have to avoid foreign bodies intrusion bearing internal, or avoid the effect of rust and corrosion. Measures for the smooth of smooth way: bearing is divided into oil and grease smooth smooth. In order to make the bearing function well, first of all, to choose appropriate use condition, the purpose of smooth solution. If only consider smooth, oil slick smoothness is preferred. Around, but there can simplify fat smooth bearing structure specialty, will be fat and oil slick smooth interest. Three, the bearing device for bearing device can correctly, affects the precision, life and performance. Therefore, design and assembly device to energetic discussion about bearing. Hope to stop device must be standardized in accordance with the homework. Job specification project usually is as follows: ( 1) Clean the bearing and the bearing connection parts; （ 2) Check the size of the interrelated parts and finishing conditions; （ 3) Device; （ 4) After good bearing device check; （ 5) Smooth supply agent. Hope that in front of the line device, just opened the TPI bearing packaging in Taiwan. Ordinary smooth smooth, not to clean, smooth filling grease directly. Also need not wash oil smooth smooth, ordinary, but, instrument using or high speed bearings, etc. , to wash with clean oil, remove rust inhibitor) on the bearing. Remove the rust inhibitor of bearing, easy to rust, so cannot be placed. Moreover, has smooth sealed bearing grease, not to clean direct use. Bearing device, owing to the different bearing structure, fit, conditions, common, due to many as the axis of rotation, so the inner ring interference fit. Cylindrical hole bearing, multi-purpose press pressure into, or multi-purpose hot charging method. Taper hole, device on the taper shaft directly, or use the sleeve device. Into the shell, the normal clearance fit, the outer ring has interference, usually with the pressure into the press and or have the shrink fit after cooling device. Use dry ice as coolant, shrink fit device, the moisture in the air condenses in bearing appearance. So, demand of appropriate anticorrosive measures.