The Proportion Of Bearing Failure Forms
The Proportion Of Bearing Failure Forms
PRODUCT
Preparation of the bearing should be done before the installation
by：Waxing
2020-11-13
One, bearing the preparation before installation 1, installation should choose as far as possible in a dry, dust-free indoor, and away from metal processing, or other equipment can produce metal debris and dust.
For everything is ready to open the bearing rustproof packaging.
2, rust-proof oil have armed lubrication of the bearing on the coating performance, for general purpose cleaning bearing can not used directly, for instrument bearings or high-speed bearing, bearing own rust-proof oil should be cleaned and then coated with a suitable lubricant to use for filling with seal or dust cover the grease of the bearing can be used directly.
3, installation tools used should be given priority to with wood or light metal products, and to keep clean.
Second, the axis and shell of test 1, cleaning shaft and the shell, confirm no scar or machining burrs, if you have used oil stone, fine sandpaper to remove.
Shell has absolutely can not have abrasives (
SiC, Al203, etc. )
Sand, scraps, etc.
2, inspection shaft and shell size, shape, and the processing quality is consistent with the drawings.
Several measuring diameter of axle and aperture.
The diagram below.
Custom message
Related Products
