NSK bearings to extend using life cycle method, the bearing knowledge

NSK bearings in order to make the service life is longer, today we share with you about NSK bearings to extend using life cycle method, hope can help to you. 1, the installation of NSK bearings ( About import bearing installation, please refer to this website 'NSK import bearings how to install'. ) NSK bearings for proper installation, affects the precision, life and performance. Therefore, design and assembly department for the installation of the bearing be fully studied. Hope to work in accordance with the standards for installation. Operation standard project usually is as follows: ( 1) Clean the bearing and the bearing connection parts; ( 2) Check the size of the interrelated parts and finishing; ( 3) Installation; ( 4) After installed bearing inspection; ( 5) Supply of lubricant. 2, alignment, alignment after bearing installed, if not done carefully alignment, alignment can lead to bearing suffered another load, friction, and vibration. The use of these may accelerate fatigue and reduce the bearing life, and it might damage the other machine parts service life. In addition, the increase of vibration and friction could significantly increase the risk of energy consumption and premature failure. 3, the basic conditions for monitoring during the period of using, often should basic external conditions of bearing operation monitoring, such as temperature, vibration and noise measurement, etc. These regular check will help identify potential problems and to prevent unexpected machine to suspend the phenomenon, make the production plan, improve plant productivity and efficiency. 4, again the lubrication in the process of operation, NSK bearings requires correct lubrication again, perfect its performance. The method of bearing lubrication, divided into grease lubrication and oil lubrication. In order to make the bearing function well, first of all, to choose suitable for conditions of use, the purpose of lubrication method. If only consider lubrication and oil lubrication. But there are grease lubrication can simplify the structure of bearing around specialty. 5, unloaded when NSK bearings will reach its final use period, should be replaced. Although bearing can no longer be used, but properly unloaded the original bearing, replace new bearing in time, to extend the service life of new bearing can play a good role in promoting. First of all, the use of appropriate tools unloaded method will help prevent for other machine components of the damage, the second, is not correct to unload the technology may cause harm to the operator.