How to measure IKO turbocharged bearing temperature

Usually, IKO bearing temperature as bearing operation began to rise slowly, 1 - After 2 hours to reach steady state. Turbo bearing normal temperature due to the heat capacity of the machine, heat dissipating capacity, rotational speed and load. If the lubrication, installation is not appropriate, the bearing temperature will go up sharply, there will be unusually high temperature, then must stop running and take necessary precautions. Using thermal device can monitor IKO bearing operating temperature at any time, and realize e. automatic alarm when the temperature exceeds or stop to prevent the shaft accidents. With high temperature often said bearing is in abnormal situation. High temperature also harmful to the bearing lubricant. Sometimes the turbo bearing overheating can be classified to the bearing lubricant. If IKO bearing in more than 125 ℃ temperature for a long time even move to reduce the bearing life. The causes of high temperature bearing include: lubrication inadequate or excessive lubrication, the lubricant. Contains impurities, heavy load, bearing damage, clearance, high friction and oil seal and so on. So the continuous monitoring IKO bearing temperature is necessary, whether measured turbocharged bearing itself or other important parts. If it is on the basis of the operating conditions, the temperature change of any fault has occurred. Regular bearing temperature measurement by using a thermometer, bearing type digital thermometer, for example, can accurate turbocharged bearing temperature measurement and display by ℃ or Fahrenheit units. Importance of IKO bearings, means that when the damage cause of equipment downtime, so this type of turbo bearing should be equipped with best temperature probe. Under normal circumstances, IKO bearings in just after the grease or lubricant will be a natural temperature rise and the last one or two days.