Things to note when using robot bearings
Things to note when using robot bearings
PRODUCT
How to adjust the safety of non-standard bearings? What process must be carried out on?
by：Waxing
2020-11-16
How to adjust the safety of non-standard bearings?
What process must be carried out on?
Source: bearing | last updated: - 2020
10 -
6 how to adjust the safety of non-standard bearings?
What process must be carried out on?
1.
Be sure to be in double operation error adjustment before adjustment a bearing, then another position adjustment.
It is important to note that adjust, be sure to carefully observe the operation of belt bearing and development trend of error in the middle of the association, and one by one.
Prompt customers: be sure to put the key in the drive roll and roll roll adjustment, in case of dual operational error.
Times, up tight component balance block up tight at the top of the component 2 commutation roll should be vertical split the length of the belt or vertical bisector of split forces.
When an extruder screw support or hydraulic oil cylinder support, 2 bearing must be another translation transformation, to ensure that the roller center line of the vertical split vertical transmission belt.
3, made the drive shaft drive shaft group group, needs to be developed on both sides of the hole hole for an adjustment.
Runtime patterns: non-standard bearing, drive belt which side slants, transmission shaft set of direction along the drive belt which side or the other direction.
Custom message
Related Products
