Dial gauge clamping device

2018 - dial gauge clamping device improvement 09 - Dial gauge is used to measure the professional and technical personnel 19 design background or locate workpiece, generally USES the magnetic table to fixed inventory. But the magnetic table fixed link for linkage, fasteners for plastic parts, in the limited space measurement, dial gauge clamping, adjustment difficulties, are prone to vibration measurement, and defects such as imprecise measurement data. Design combined with correction crank drive size of reciprocating motion stroke of the actual demand, the new table should have the following features: ( 1) Should have positioning and clamping function at the same time, as far as possible simple and compact structure, convenient installation and adjustment; （ 2) Should have enough clamping force, prevent dial gauge in the measurement of vibration displacement, cause measurement error; （ 3) For equipment positioning itself as a benchmark, no frequent adjustment, reduce the adjustment of working hours. Design with the smoke guide as a datum ( Protection) , will the new table design in a cross section for two-way thread clamp structure (R Figure 1. ) , can be embedded in the groove end smoke guide rail, USES the M6 screw combined with clamp clamping, positioning, dial gauge socket is in a wide range across the table at the other end locking round hole, using M6 screw locking. Specific use method as shown in figure (2) the one in figure (3), dial indicator sleeve in a wide range across the table lock hole, and M6 screw locking table which on the other side embedded smoke guide and lock. Use effect is improved, dial gauge is simple to install in a wide range, the average time from 60 minutes reduced to 20 minutes, greatly reduce the amount of labor. This table can be used in a variety of models the horn mouth adjustment, the design thought and method for other improvement of positioning and clamping device has a reference value. Desmond tutu 2 in figure 3