Describe the advantage of rolling bearing source: bearing | last updated: - 2020
11 -
05 described the advantage of rolling bearings non-standard bearings is a support shaft parts, it is able to correctly guide shaft rotation, can also undertake the air shaft parts, bearing can be divided into rolling bearing and drag bearing, bearing refers to the rolling bearing in general.
Below, the advantage of rolling bearings.
1 friction small, small output power cost, mechanical energy is high, easy to start;
2, specification standardization in tolerance matching, be helpful for installation, dismantling, maintenance is convenient;
3, compact structure, light in weight and radial size more smaller;
4, high precision, high speed ratio, small damage, long lifespan;
Part 5, have automatic bearing new features;
6, apply to mass production, stable quality, manufacture efficiency also browse the read this article: non-standard bearing maintenance for non-standard bearings use and always maintain its some characteristics, it is important to further strengthen maintenance in time,
Regular maintenance)
。
According to the regular maintenance of appropriate, to ensure early find common failures, to avoid safety accident development is critical to improve the production efficiency and rationality.
Non-standard bearing cleaning the non-standard bearing down to examine, with shooting methods such as well first appearance record.
In addition, to determine the amount of the remaining lubricant and lubricant sampling, then clean the bearing.
A, non-standard bearings cleaning rough washing and fine washing, can be put in the application of the vessel bottom and spherical metal material on the rack.
B, rough washing, in the selection of oil soft brush, remove grease or gelling.
If at this time in oil bearing rotating, pay attention to because the rolling surface dirt and other damage.
C, fine cleaning, slowly rotating bearings in the oil, must be carried out carefully.
General application of cleaner diesel or gasoline for neutralization water content, on the basis of temperature must sometimes applied caustic soda solution, etc.
No matter use which cleaner, must often blocking clean.
After cleaning, immediately on the bearing sizing rust inhibitor or antirust processing fat.
