Bearing inner and outer circle position and fixed

The positioning of the roller bearing inner and outer circle and fixed method are many, for several commonly used methods of the following: a) With shaft with retaining ring embedded in the shaft inside the groove, it is mainly used for axial force is not big and the speed is not high; b) With screw shaft end ring fastening, can be used under the high speed under large axial force, should be screw locking measures; c) With a round nut and lock washer with fastening, mainly used in high speed, large axial force; d) With a taper sleeve positioning, check washer and nut fastening, used in optical axis, bearing inner ring for the taper hole. e) With embedded housing groove inside the hole with elastic ring, it is mainly used for axial force is not big and decrease the size of bearing assembly; f) With bearing end cover fastening, used in high speed, large axial force under all kinds of centripetal, thrust and radial thrust bearing; g) With shaft with elastic ring embedded stopper of bearing outer ring groove clamp, used when the shell inconvenience when setting convex shoulder; h) Use thread ring clamp for bearing high speed, large axial force, and is not suitable for bearing end cover fastening. Rolling bearing inner and outer ring fixed to prevent axial bearing under axial load, axial moving relative to the shaft or a hole, the bearing inner ring and shaft, outer ring and a hole must be fixed axial, commonly used inner and outer ring rolling bearing axial fixed way is as follows: ( Professional motor bearing application solutions provider) Focus on miniature high speed, low noise, long life motor bearing telephone: fax: an article on the sales @ : bearing products customs classified guidance, it is worth collecting! Next up: linear ball bearing and linear motion bearings, let you choose, which one would you choose?