Bearing damage easily

The cause of the bearing is easy to damage the source: this website the author: the administrator to release time: 2020 - 06 - 11 10:49:36 views: 1 in all kinds of products you found in the use of the importance of bearing no bearing, may be cannot be achieved very good connection effect. In the early start has started manufacturing bearing and the manufacturing process of bearing has tended to mature. Our government situation is also more attention to the development of bearing, the bearing industry have more supporting policies, makes the bearing industry has been on the rise trend. Bearing is, generally speaking, there are corresponding use fixed number of year, but some haven't reached the use fixed number of year bearing has been damaged, let's look at one of the reasons. A, improper installation. Due to improper installation of the reasons to account for around 16%, a decrease in the bearing life in general mainly includes the following two reasons: first is to install too hard and some staff will use hammer bearing, for example, the bearing damage is very large, it is easy to damage. Second, bad lubrication. Poor lubrication is a major cause of premature bearing damage, premature failure of the case by 50% are caused by poor lubrication, specifically including: no timely filling lubrication products, lubricant selection error or filling in place, lubrication mode is not correct, and so on. Three, fatigue damage. Fatigue damage is bearing damage to another common way, by 34% in the early damage of are thus caused. The main reason for bearing fatigue are: bearing long-term overload operation, the bearing is broken not timely maintenance or repairs, equipment aging and so on. The main reason for the occurrence of premature bearing damage due to improper use, so we in the use of bearings need to be in the correct way to operate, the example above have to cite some examples, readers can refer to it. And appear not because caused by improper use, the main cause of bearing damage because the quality is not up to standard, so the author thinks that the reader can through the consumer channels to protect the interests of their own. It also proves that a more important thing, is a time when we are buying bearings or should pay attention to distinguish the quality problems of it.