Texas jiaxing bearing, sliding bearing assembly basic principles

【 Jiaxing bearing 】 Texas Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we learn the basic principle of sliding bearing assembly. Sliding bearing assembly basic principles: 1) Before assembly must be familiar with assembly drawings, understand the structure and assembly technology requirements. 2) Ensure reasonable gap between bearing and shaft and the good contact. 3) To ensure good contact between the bearing and the bearing seat, especially the thin wall bearing, more to ensure a good seal. 4) The bearing must be firmly fixed on the body, bearing and the body contact between closely, try to high speed machine is particularly hard. 5) In all components of the bearing with vice, only allow relative movement between journal and bearing, bearing will never allow rotation. 6) Oil groove digging is reasonable, ensure lubricating oil road unimpeded, the lubricating oil can flow to flow into the bearing. 7) To ensure the quality of the sealing device, shall not leak, also cannot let dust intrusion. 8) Before assembly, must carefully check the technology condition of parts. The unqualified parts, assembly is not allowed. Before assembly parts must be deburring and cleaning seriously. If you are interested in jiaxing jiaxing bearing bearing factory introduction of Texas above or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, Retail sales center) Reprint please indicate the source