Bearing fault handling and necessary maintenance measures, please

High temperature bearing fault and maintenance method of high temperature bearing temperature too much reasons: lubricating oil products quality management does not comply with the design requirements or metamorphism, lubricating oil viscosity is too high; Institutions as well as the assembly tight ( Gap shortcomings) ； Plane through high temperature bearing system assembly too tight; High temperature bearing race on the shaft or shell rotation. Load stress; High temperature bearing cage or rolling body fracture, etc. High temperature bearing allows for a slightly on the plane in a work noise, if too much noise or abnormal noise or collapse, indicating a high temperature bearing failure. High temperature rolling bearing comparative study can generate some noise cause analysis of complex, one is through the high temperature bearing inner and outer ring with working surface wear. As we this kind of wear and tear, destroy the high temperature, high temperature of bearing and shaft bearing and shell with social relations, correct position, development axis deviation from the students and the axis at high speed economy movement to produce sound. When high temperature bearing fatigue, its surface with a metal flake, also can make enterprise high temperature bearing radial clearance increasing to produce sound. In addition, the high temperature bearing lubrication ability is insufficient, the formation of dry friction, and need high temperature bearing broken can choose to create a abnormal sound. After high temperature bearing wear loose kuang, maintains a looseness damage, also can produce sound. High temperature bearing fault and repair method of high temperature bearing maintenance: as long as possible in order to maintain high temperature bearing in good condition, maintenance, repair, accident prevention in advance, ensure the reliability of operation, increase productivity and efficiency. Corresponding machine running state of maintenance, good standard of work, performed on a regular basis. These include the supervision of operation, supplement or replace lubricating oil, regular check to remove. Maintenance projects in operation, high temperature bearing rotation noise, vibration, temperature, lubrication condition and so on. 2, high temperature influence bearing maintenance: high temperature lead to bearing cleaning: under high temperature bearing is removed for maintenance, the appearance of the first recorded data plane design high temperature bearing, confirm the residual stock of lubricant, sampling technique after check with lubricant, high temperature bearing. As a system cleaner, ordinary users to use traditional gasoline, kerosene. High temperature bearing the high temperature influence of the fault and maintenance methods removed bearing cleaning, rough washing and fine washing, respectively, can be placed in a container, put some metal mesh bottom first, make the high temperature lead to bearing does not directly contact pressure vessel of dirt. Coarse when cleaning, if the high temperature and bearing with dirt, can damage with high temperature bearing rolling surface, should be timely analysis. In coarse clean oil, use us to brush to remove grease, adhesive, after clean, roughly into fine cleaning). Fine cleaning, high temperature bearing in cleaning oil rotating at the same time, carefully cleaning at the same time. In addition, the clean oil should always be kept clean. A: bearing disassembly and installation of you really are very familiar with it next up: none