Three important factors influence the life of sliding bearing block
Three important factors influence the life of sliding bearing block
PRODUCT
Bearing damage provoking troubles! 11 picture help you realize the damage way, reason and treatment method
by：Waxing
2020-11-12
In the mining machinery, bearing components is very important.
Such as jaw broken on four sets of bearings, between eccentric shaft and moving jaw with two sets of bearing cohesion, between eccentric shaft and housing with two sets of bearings.
Bearing use may encounter in the peel, burns, the problem such as crack defects, is likely to be due to selection error, improper use or smooth.
This article to share 11 kinds of method and processing method of bearing damage.
Bearing needs careful attention to in practice, let's take a look at the below bearing needs pay attention to in using the seven items: 1, adhere to the bearing and the surrounding clean.
Even the eyes can't see the little dust, will also bring bad influence to the bearing.
So to stick around, clean the dust from invading bearings.
2, when carefully earnestly.
Careless careless to bearing intense impact in practice, which will have scars, indentation, crack and fracture damage, and become the cause of the accident.
3, use the appropriate operating tools.
To prevent the substitution of existing tools for, it is necessary to use appropriate tools.
4, to pay more attention to the bearing of the rust, prevent use in wet places, to pay more attention to operation with clean hands, for not to sweat with, had better wear gloves.
5, those who use should be familiar with the bearing.
6, establish standard bearing use homework.
To make bearing play and stick to proper performance for a long time, must really make regular maintenance (care
Regular inspection)
。
Properly spread regularly, do the early detection of fault, to avoid the attack of the accident.
Custom message
Related Products
