Roller bearing overheating

The reason of roller bearing overheating source: this site author: the administrator to release time: 2019 - 02 - 28 14:44:51 views: 0 roller bearing the cause of the overheating of bearings in machinery industry are very important in many mechanical equipment parts and components, but everyone should know, now in our production and living in the different USES of mechanical equipment is really too much, and the different effects of the mechanical equipment used for bearing some of the requirements is also very different. Roller bearing in now is very common in the machinery and equipment, in the use of mechanical equipment overheat if one of the roller bearing is easy to cause damage to equipment, what's the cause of roller bearing overheating have? 1, roller bearing and shaft neck joint uneven or interface is too small, per unit area than the pressure is too large, most of this kind of circumstance happening after the new machine commissioning or a new bearing shell. 2, roller bearing deflection or crankshaft bent, and twisted. 3, bearing quality is bad, the quality of lubricating oil, or oil plug. Gear oil pump oil pressure is too low, and oil supply disruptions, the four short of oil, dry friction. 4, roller bearings have sundry or oil too much, too dirty. 5, bearings with uneven excessive wear. 6, compressor installation spindle and motor shaft coupling not find is that the error is too big, caused two axis tilt. In the use of installation of roller bearing mechanical equipment, if the roller bearing appeared the phenomenon of overheating, you probably caused by several reasons above, this time to stop the operation of the machinery and equipment in time, and according to the different reasons to take concrete repair measures, only in this way can prevent damage of mechanical equipment appear more serious. Here, everyone is interested in roller bearing more? Welcome to those in need to our company to buy roller bearing!