NSK bearings use items and maintenance procedures

NSK bearings imported in addition to the quality, also be very precision parts, is not only the function of high bearing, assume that in the process of using improper use, not only cannot achieve the expected function effect, and it's easy to make the bearing damaged, we must now be aware of in terms of lubrication. NSK bearings use items: one, use really carefully when installation does not allow strong stamping, shall not use directly on the bearing, cannot pass to move body pressure. Second, the use is suitable for the installation, accurate things as far as possible using the dedicated things, trying to prevent the use of cloth and short fiber, things like that. Third, try to stick to the bearing and its around environment clean even invisible to the naked eye chuckled dust into the bearing, also can add bearing wear, vibration and noise. Small dilettante gatekeeper, NSK bearings industry is how to progress the corrosion? Four, to prevent rusting of the bearings directly with the hand take bearing, to fully wash hands fluid, and coated with fine mineral oil and then stop the operation, especially in the dry season and summer to pay attention to rust. In some special operating conditions, can be achieved with NSK bearings are good at traditional computing stature, especially under the condition of light load. These special operating conditions is, when the moving surface ( Track and move) Can be separated by a lubricating oil film effectively and constraints of pollutants may cause surface damage. In fact, under the condition of ambition, the so-called durable bearing stature is possible. NSK bearings used in the process, of course maintenance work is also essential, assumptions, NSK bearings continuously work does not stop the good maintenance, NSK bearings using water-soluble cutting fluid, is likely to return to have water on the surface of metal corrosion, thus forming a bearing appearance, poor lubrication, in turn, cause machine, mechanical operation undeserved, cause harm is also big, therefore, NSK bearings on maintaining the remaining work is inevitable. The bearing NSK bearing network share use maintenance steps: 1, adhere to the NSK bearing NSK bearings is smooth and clean before examination, NSK bearing appearance should be clean, and then remove the spare parts of NSK bearings. Give special attention to, oil seal is very fragile parts, NSK bearings in check and remove don't overexert, so as to avoid damage to bearing parts. If NSK bearings in the check and the surrounding local oil seal has been showing a bad condition, please stop changing, in order to prevent the bad oil seal will cause damage of NSK bearings. 2 NSK bearings, ensure smooth oil quality NSK bearing life is too short, many of the later found among other factors, normal, but I don't know the quality also directly affects the smooth agent. Check smooth agent of NSK bearings: smooth agent on the friction between the two fingers, if have any pollutant, can feel to it; Or in the back, coated with a thin layer of oil, and then seal the light. Then change smooth agent of NSK bearings. 3 NSK bearings, NSK bearings working environment inspection, let it not be exposed to environmental pollutants or moisture. Like to present two points should be taken in front of the plastic or similar materials of paper machine. Bearing working environment is also very important, a lot of machinery in the imported bearing is due to the working environment is not enough, cause imported bearing life finished early. 4, NSK bearing seal bearing seal: the purpose of avoiding dust, water and impurity entering the bearing, and also to prevent the loss of smooth agent. Good sealing, can guarantee the normal operation of the machine, and reduce the noise, increasing the using life of the parts.