The Role of Air Bearings in the Future of Clean Energy
Air Bearings
PRODUCT
Non-standard bearing factory is how to the bearing maintenance?
by：Waxing
2020-11-15
Non-standard bearing factory is how to the bearing maintenance?
Source: bearing | last updated: - 2020
07 -
18 non-standard bearing maintenance for non-standard bearings and keep its long-term performance into full play, must earnestly to do regular maintenance (
Regular inspection)
。
Through proper periodic inspection, do early detection of fault, prevent accident arrangement is very important to increase productivity and efficiency.
Non-standard bearings cleaning non-standard bearings will be removed when checking, use methods such as photography first appearance record.
In addition, to confirm the amount of residual lubricant and lubricant sampling, and then clean the bearing.
A, non-standard bearings cleaning divided into rough washing and fine washing, can be put in use at the bottom of the container and on the metal frame.
B, rough washing, oil using a brush to remove grease or adhesive.
If at this time in oil bearing, pay attention to the rolling surface due to foreign bodies such as damage.
C, fine cleaning, slowly rotating bearings in the oil, must be carefully.
Commonly used cleaning agent for neutral aqueous diesel or kerosene, according to the need to sometimes use warm lye, etc.
No matter use which kinds of detergent, often should filter clean.
After cleaning, coating anticorrosive oil or antirust grease on the bearing immediately.
Custom message
Related Products
