Bearing installation method secrets - Group co. , LTD

Bearing is one of the important factors affecting the service life of bearing installation, jiaxing bearing group sales co. , LTD. , is engaged in bearing sales for 15 years, for thousands of customers, many a line ZhuanPei workers in the bearing installation, due to the improper method, reduce the service life of the bearing, or even directly scrap bearing. In order to help and better serve customers, reduce customer loss caused by the improper installation method, jiaxing bearing group sales co. , LTD. , the technical personnel to write the article of this bearing installation method, the hope can help to more bearing use customers; Bearing is the key to the mechanical rotating parts, the stand or fall of bearing installation or not, will influence the accuracy, bearing life and performance. To affect the normal operation of equipment. Bearing the first contact with the shaft in the installation process, prone to interference quantity with the small amount of interference. 1) Interference quantity is smaller, when installation should pay attention to pressure into the bearing inner ring, use socket installation, conditions allow as much as possible to use the pressure into the press and tool directly on bearing is strictly prohibited, affect the service life of the bearing. 2) Large amount of interference, the heating method, with the principle of heat bilges cold shrink up big bearing inner hole to push the bearing, when heated, should use oil to heat, the temperature control in the 80 - Between 100 degrees, it is forbidden to impact bearing tempering temperature is too high to avoid the material easy to harden. More bearing consulting, please pay close attention to jiaxing bearing group sales co. , LTD. , a lot of people also like these articles: 1, the HRB。 Jiaxing bearing 】 Install and use the details of the 2, how to install the HRB high-speed precision angular contact ball bearing? 3, installation of high speed precision bearings must pay attention to what issues? 4, jiaxing bearing need to be cleaned before installed? 5, the installation of precision machine tool bearings