TIMKEN bearing use the matters needing attention - bearing knowledge

Scroll TIMKEN bearing is precision components, and its use should be measured accordingly. No matter how high performance using TIMKEN bearings, if use undeserved, will not get the desired performance. Using considerations about TIMKEN bearings are as follows. A, keep the TIMKEN bearing and the surrounding environment clean even tiny dust into the TIMKEN bearings, invisible to the naked eye also will increase the wear and tear of TIMKEN bearings, vibration and noise. TIMKEN bearings and its surrounding accessories should be kept clean, especially the dust and dirt, tools and working environment must be clean. Second, use the installation should be careful when not allowed powerful punch, are not allowed to use hammer percussion TIMKEN bearing directly, don't allow through the transfer roller pressure. Three, using appropriate, accurate installation tools to use a special tool, such as TIMKEN dedicated heater and drawing machine tools, etc. , to avoid the use of cloth and short fiber, things like that. Four, to prevent rusting TIMKEN bearing directly take TIMKEN bearings, with the hand to wash hands fully the sweat, and again after coated with high quality mineral oils, especially in the rainy season and summer to pay attention to rust. However, in some special operating conditions, can obtain a longer than traditional computing by TIMKEN bearing life, especially in the case of light load. These special operating conditions is, when the rolling surface ( Track and rolling piece) Can be separated by a lubricating oil film effectively and the surface of the limit of pollutants may cause damage. In fact, under ideal conditions, the so-called permanent TIMKEN bearing life is possible.