The importance of KOYO bearing trajectory and the loading charge

KOYO bearing a rotation, inner ring and outer ring raceway surface, with rolling body is rolling contact, thus path to the dark side, attached to the raceway surface bearing orbit is not exception, this change can be learned that load conditions, so in the case of remove the bearing, please keep close attention and observation on the surface of the raceway. If you look closely at orbit, will know that only bear radial load, withstand large axial load, bearing torque load, or extreme rigid in bearing box is not equal. Can check if the bearing with accidents such as whether the load and the installation error of kingdoms, the cause of bearing damage and be investigated for clues. If there is no error and can be used correctly, to KOYO bearing life before, but with a very long time, in this case, the damage status to divest. Bearing on the other hand, there are early damage by accident, and yield to the early damage of use, as the reasons of early damage, not enough to use and the consideration on the lubrication, and therefore foreign invasion, bearing assembly error and axis deflection of large, bearing not enough research on shaft and bearing box, etc. These reasons, so to speak, KOYO bearing more overlap each other. So, want to use machine to fully understand the bearing, conditions of use, of the outer bearing structure on the basis of, if we can figure out before and after the accident, bearing again according to the damage of the bearing and a variety of reasons, can prevent the similar accidents from happening again. When the bearing temperature, first of all determine whether false action, such as really rise, should do the following treatment: ( 1) 。 Check the cooling water pressure, water flow and pipeline system is normal. If water is likely to be lower filter blockage, cannot be handled in a timely manner, to stop treatment, when confirm can work, then put into use. ( 2) 。 Should be to check if the governor oil pressure, oil pressure is low can lead to cooling water hydraulic valve closed. ( 3) 。 Check for different sound, bearing KOYO bearing and detect bearing degrees whether there are abnormal. ( 4) 。 Take oil whether there is a change of color, sample observation and test to see whether metamorphism. If confirm the degradation new oil should be replaced downtime. ( 5) 。 Check the oil standard oil level is normal, if abnormal, check that the sump oil discharge valve is shut. If the matter, should fill oil, if is the sealant mat permeability oil, should stop processing. When we are in the use of KOYO bearing, if it is found that the temperature is very high, is to stop the equipment running, and find out its reason, and provide solution for processing according to the above, but may be due to the reason of bearing heating is different, so the solution is also different, so still have to treat, particular case is particular completed with the help of the technical staff.