What is the difference between mild steel and carbon steel?
What is the difference between mild steel and carbon steel?
PRODUCT
The ceramic bearing grease filling method
by：Waxing
2020-11-13
Perception of ceramic bearing, I believe that most people still don't know, now the ceramic bearing grease filling methods of what to do.
When mechanical work is ceramic bearing are most vulnerable to loss of parts.
Especially in the continuous work, must want to undertake maintenance and maintenance to guarantee the normal service life of the machine.
Put into use in the new machinery, generally after running 100 hours to replace the grease (
Oil)
1, 500 hours after each run.
Because the work of the ceramic bearing strength than the average plane needle roller bearing is much bigger, so need to maintain time must be strictly controlled, in each of the 1500 hours after operation, should be replaced, grease filling the oil amount is too little or too much, because too much or too little will cause bearing grease fever, amount to general in ceramic bearing should be 1/2 to 2/3 of the chamber volume.
At the same time, due to mechanical work environment is more complex, a lot of water also is cloudy, you also need to do special protection with ceramic bearing parts, in order to prevent the impurities such as sand mixed with bearing internal, affect the mechanical work, so when maintenance to the ceramic bearing part fully cleaning before oil operations.
Custom message
Related Products
