Little knowledge | motor bearing maintenance methods

There is rotational, have HRB bearing ( ) Jiaxing bearing group sales co. , LTD. ( The company) Is bearing group co. , LTD. Established in jiaxing spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong spot supply, is the group's retail sales center. Motor is widely used in areas such as water pump, motor without bearing parts, therefore, the motor bearings without lubrication, so I need to do a good job of lubricating maintenance for 1, the new pump put into use, must be replaced after running 100 hours (grease Oil) 1, 500 hours after each run. 2, floating bearing is lubricated by grease, run after 1500 hours, should be replaced, grease filling the oil amount is too little or too much, because too much or too little will cause bearing grease fever, amount to general in the bearing should be 1/2 to 2/3 of the chamber volume. 3, for bearing is lubricated by lubricating oil, the oil should be added to the specified location. 4, containers of lubricating oil or grease to clean, should be sealed at ordinary times, should not have dust, iron and other sundry, in order to avoid damage to the bearings. 5, motor bearings commonly used sodium base grease, the grease is characterized by high temperature 125 ℃, but easy to dissolve in the water, so can't use it for water pump bearing lubrication. If you are more interested in jiaxing bearing group co. , LTD. The author introduces the information or have any questions, please click on the website on the right side of the online customer service or call:, you full close jiaxing bearing purchasing consultant company. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source