How to lubrication maintenance FAG bearings, bearing knowledge

Lubrication has important influence on FAG bearing of life, so we must apply the correct lubrication and maintenance methods. 1, oil bath lubrication oil bath lubrication FAG bearings in ordinary lubrication method, suitable for low, medium speed, FAG bearing lubrication. Would FAG bearing part in the tank, the lubricating oil by rotating FAG bearing parts take up, and then flow back to the oil level of oil tank should be slightly lower than the lowest at the center of the roller. 2, drip lubrication oil drip lubrication is suitable for need to ration oil FAG bearing parts, drip oil every 3 - general A drop of it is advisable to 8 seconds, too much oil will cause FAG bearing temperature increased. 3, circulating oil lubrication oil pump will filter the oil transfer to FAG bearing parts, by FAG bearing lubricating oil filter cooling after use. Because of the circulating oil can take away a certain quantity of heat, cooling the FAG bearing, therefore method is suitable for high speed FAG bearing parts. 4, spray lubrication with dry compressed air sprayer and lubricating oil mixed form oil mist, spray FAG bearing, can effectively make the FAG bearing cooling airflow and can prevent the intrusion. This method is suitable for high speed, high temperature FAG bearing parts of lubrication. 5, spray lubrication oil pump will come into your FAG bearing high pressure oil through the nozzle, into the bearing of the FAG bearings at the other end into the oil in the tank. FAG bearing in high speed rotates, rolling element and cage with high rotate speed makes the surrounding air, the air with general lubrication methods are difficult to be sent to FAG bearing, lubricating oil and lubricating oil spray must use the method of high-pressure jet to FAG bearing, the position of the nozzle should be placed between inner ring and retainer center