Harbin, heilongjiang province, a senior manufacturer on high temperature bearing maintenance

Heilongjiang Harbin city senior manufacturers on the curing temperature bearing high temperature bearing maintenance and remaining: 1, a wide variety of high temperature bearing, but the same structure, some seals, some not, a sealing to seal with the awl pry, remember don't too hard, so as not to damage the internal structure; 2, put the bearing into the first cleaning in the gasoline or kerosene, wipe residues on the bearing of sludge and dust and internal is aging grease, in this process, you would have a bearing in full contact with gasoline or kerosene, don't stop rotating bearing, until the bearing in the process of rotation so far no other sound. Whoever has rust bearing are using metallographic sandpaper quietly wipes polishing, until no rough feeling fingered; After 3, use dry cloth to clean the bearing wiped dry, then the bearing surface coated with anti-rust oil ( Pay attention to the bearing internal don't contact with any liquid) To the appearance of anti-rust purposes; 4, then use high temperature oil evenly coated in the interior of the bearing, 3/1 of the internal space ( Excess oil bearing resistance get bigger at work, too little overheated temperature rises, grease can dramatically reduce the useful service life of bearing used) 。 Make grease inside complete average, plentiful smooth effect; （ Initiative to add fluoride type high temperature grease) 5, and then with good oil bearing sealing ring can be put back, no seal is no need for the high temperature bearing needs to maintain the premise 1 care, bearing in the process of using sound, cassette or beyond the use of grease life ( Fat synthesis speed 24 h / 0. 02g） 。 Bearing initiative maintenance care once half a year, if not present in the process of using sound, tapes, no maintenance, care immediately after being in the future to present the problem, then stop maintenance care. 2, bearing used long will wear, smooth fat will be aging, maintenance or care right expires, please change. Remove after carefully review the bearing internal wear is not serious, if serious need not maintain a new directly, not serious according to the maintenance and the remaining steps; A: hot! Hot! Hot! Chongqing bearing factory is really too hot! Next article: jilin changchun factory take the purpose of the rolling bearing lubrication