Cylindrical roller bearings are introduced
Cylindrical roller bearings are introduced
PRODUCT
Bearing factory brief introduction bearing removal methods
by：Waxing
2020-11-17
Self-lubricating bearing factory tell us apart things according to the need to plan production is also very important.
When opened, according to the drawings for discussion apart method, sequence, the query of self-lubricating bearing conditions of cooperation, to ensure our open work confidently.
1, the outer ring of the outer ring apart apart interference cooperation, advance in setting several outer shell on the circumference of a circle of kneading screw with screws, one side equal to tighten the screw, one side open.
These cover usual blind plug, screw hole taper roller type self-lubricating bearing separation of self-lubricating bearings, shoulders set in the shell several cut off, use block, with the press, or hitting the open quietly.
2, cylindrical hole apart of self-lubricating bearing inner ring apart, can use mechanical pressure pulls out the latest briefly.
Meanwhile, attention should be paid to let the inner ring to accept its pulling force.
Width of self-lubricating bearings, oil pressure method and drawing fixture and apart.
NU, NJ cylindrical roller self-lubricating bearing inner ring apart can use induction heating method.
In a short time, heating part, make the inner ring swell after drawing method.
3, taper hole of self-lubricating bearings apart apart contrast small band set set of self-lubricating bearings, with fastening on the shaft gear support inner ring, the nuts back a few times, use the block with a hammer hit apart.
Custom message
Related Products
