Motor bearing temperature standard
Motor bearing temperature standard
PRODUCT
Bearing assembly
by：Waxing
2020-12-08
Bearing in the process of assembly, the basic is divided into three steps: 1.
The inner ring and outer ring and rolling body matching, guarantee some coordination with the relationship between them, such as the clearance of the bearing should be conform to a certain value or nominal width tolerance requirements, etc. ;
2.
Assembled cage, riveting or make cage to produce some deformation, so that the division within the ring of bearing roller, make its flexible rotation and not scattered, for the rolling bearing can be used in all kinds of machinery installation and;
3.
Greasing and equipped with sealing device.
No cage form of bearing or bearing, step 2, 3 can not.
Small and medium-sized deep groove ball bearings generally use two pieces of ribbon cage to separate steel ball.
After the separation of internal and external ring can put more quantity of steel ball, after clearance inspection, can adopt the way of ferrule deformation in the last one or two grain of steel ball, uniform after the ball, in the first half cage, then the other half of the rivet cage into the belt, using the riveting press, and pass by demagnetization, cleaning, drying, after the inspection process in the finished-product stock bearings.
Custom message
Related Products
