Vibration motor imported bearing installation techniques - bearing knowledge

Replace imported bearings of vibration motor, reflected the effect is different, and must be used the same as the original model of bearing, and performance in this aspect also has the effect of the significance of better, which can reflect better results in this respect. First of all, from the following to introduce import bearing installation. Replace new bearing vibration motor, must use the same as the original model of the bearings. 1) Bearing washed with kerosene, pressed into the bearing seat, fill toward the roller bearing outer ring shell 3 lithium base grease to two-thirds full, with clean hands evenly daub, mount bearing gland, use add bolt locking glue binding bolt pressure bearing gland; 2) Bearing for inside and outside the separable cylindrical roller bearings, bearing inner suit on the rotating shaft and should be in place; 3) The bearing seat is installed on the casing, such as grease oil injection hole, must be on the position. Use add bolt locking glue tighten bolts pressure bearing; 4) Inside and outside the eccentric block is installed on the rotating shaft and is in place, with the shaft key shaft key should be load within the keyway to eccentric block, shaft with ring on the rotating shaft; 5) Tight the bolt fixed eccentric block, adjustable eccentric block, make it reach to unload in front of the Angle position and tighten the fastening bolts. Above after completion of assembly, shaft should have certain axial string move; 6) On guard at the ends of the vibration motor, with screw fastening. Imported bearings for the installation form of vibration motor and other aspects of performance are not change, the effect of it from different perspectives to consider also has a certain change, in the form of effect, slowly for all aspects of the installation is also have a certain understanding.