Jiaxing science for bearing bearing

Jiaxing bearing group sales co. , LTD. , is the spot sales center of jiaxing bearing factory, specializing in HRB bearings, application in production design and related machinery has a wealth of technical experience, today we are together and we have to learn how to scientific experts for bearings. Science for jiaxing bearing: 1. Storage requirements ( 1) Clean and dry, 2) Prevent the air flow, 3) If the storage room relative humidity is more than 75%, suggest equipped with air conditioning. （ 4) To prevent vibration ( 5) Maintain a constant temperature ( 48 hours of temperature variation is not more than 3 ℃) （ 6) Bearing before delivery are coated with anti-rust oil, temperature too low or too high will lead to rust-proof oil metamorphism, room temperature should be controlled in 0 25℃。 （ 7) Regularly check: according to the provisions of the bearing products antirust every 10 - Regularly check a 12 months. If found a rusty phenomenon, oil seal packing should be a new oil seal packing. 2. Temperature and humidity, 1) As long as the warehouse has more than 60% relative humidity temperature change is not big, the bearing can be a good long-term stored in the original packaging. In the relative humidity is less than 50% of the clean air, clean bare just now surface rust and corrosion will not occur. The humidity increases, the possibility of corrosion will increase, especially when air relative humidity is more than 75%. （ 2) With seals or dust cover bearing after long-term storage, bearing the characteristics of the grease could be affected. 3. The storage of large bearing large bearing the right way to store only flat, which put the location of the bearing with the level, the side bearing ring should be supported. If the bearing in the vertical position, due to the thickness of the bearing ring is relatively small, the weight of the bearing rings and rolling body may result in the permanent deformation of the bearing. Bearing scientific storage is very important, if improperly stored and cause bearing corrosion, rust or bearing is that not good, even if there is no damage on the surface of the phenomenon, so it is also possible in the process of bearing operation such as faults, so be sure to seriously bearing deposit. 。 If you are interested in the above jiaxing bearing factory introduction of HRB bearing or have any questions, please click on contact us page on the right side of the online customer service, or call: 4006578186, jiaxing bearing retail center you full thoughtful procurement consultant. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, Jiaxing bearing factory) Reprint please indicate the source