Jiaxing bearing small make up sharing: the characteristics of the normal operation of rolling bearing and practical diagnosis techniques

There is rotational, have HRB bearing ( ) Jiaxing bearing the author sharing: the characteristics of the normal operation of rolling bearing and practical diagnosis techniques. Jiaxing bearing group sales co. , LTD. ( The company) Is jiaxing bearing factory set up in the spot sales window, specializing in HRB brand bearings, facing the whole country, the existing stock 50 million yuan, covers the whole bearing, have very strong cash supply ability. The characteristics of the normal operation of rolling bearing and practical diagnosis techniques: we found in the long-term production status monitoring, rolling bearing in the process of its use showed a strong regularity, and the repeatability is very good. Normal high quality bearing, at the beginning of the use of vibration and noise are relatively small, but there are some scattered of spectrum amplitude is small, may be due to some defects in the process of manufacturing, such as surface caused by burrs, etc. Movement after a period of time, maintain a certain level of vibration and noise, frequency spectrum is very single, only one or two times the frequency. More than three times the power frequency spectrum, seldom appears bearing condition is very stable, steady working period. Continue to run into the use of late, after bearing vibration and noise began to increase, sometimes a different sound, but the change of vibration increase is relatively slow, at this point, the bearing kurtosis value began suddenly reaches a certain value. We believe that the bearing is characterized by the early failure. At this time, requires that the bearing is closely monitoring, pay close attention to the change. Since then, bearing kurtosis value began falling fast, and is close to normal, and significant increase in vibration and noise, it began to accelerate the increase, when the vibration more than standard ( Such as ISO2372 standard) , its bearing kurtosis value also began to increase rapidly, when more than vibration standard, and kurtosis value is more than normal ( Available kurtosis relative standard) When we think of bearing fault has entered the late production, should be timely maintenance equipment, change of rolling bearing. Late show bearing fault feature to severe fault ( For bearing damage, such as holding shaft commonly, burns, sand spallation, raceway, wear beads, etc. ) Most of time not more than a week, the bigger the equipment capacity, the faster the speed, the shorter the time interval. Therefore, in the actual fault diagnosis of rolling bearing, once found late fault characteristics, should be decisive judgment is bearing fault, arrange inspection as soon as possible. 24-hour customer service hotline: if you are more interested in jiaxing bearing the author introduced the industry information or have any questions, please click on contact us page on the right side of the online customer service, or call:, you close the way of jiaxing bearing purchasing advisors. - - - - - - Editor: jiaxing bearing sourcing consultant LTD. All rights reserved, The company) Reprint please indicate the source